The antiseptic wood cracked. Is this normal?

Anti corrosion wood is often used in anti-corrosion wood floor, engineering projects, landscape, anti-corrosion wood flower box, etc., for everyone to rest and appreciate the natural scenery. Because the key installation is outdoors, it is more likely to crack under the light wind and sunlight. Therefore, under normal conditions, how to prevent anti-corrosion wood cracking?

In fact, the cracking and deformation of the wood used for outdoor antisepsis are caused by a variety of factors. The location, direct sunlight and humidity caused by rain are the reasons for this kind of situation. We can't change this natural standard in many ways, so there is no stronger maintenance method at this stage, but it can be controlled as much as possible in the whole process of engineering construction. The most external surface layer of antiseptic wood products is the most reliable part with good quality and characteristics, so the polishing of antiseptic wood products should be reduced as far as possible.

The wood deformation is caused by the internal stress, and the wood cracking is caused by the change of the surface area of the wood. The direct reason for this kind of transformation is that the moisture content of wood has changed. The advantage of antiseptic wood is to prevent the way of antiseptic wood cracking. Cracking belongs to all normal conditions. All wood will crack, which can't be prevented. To solve the problem of cracking of antiseptic wood, we need to carry out maintenance in the middle and later stages. We can use dry hanging glue to fill the joints, and then brush wood oil. Remember that it is not necessary to brush tung oil, especially for light tone goods, because the tung oil will turn black after a long time. Secondly, wood oil belongs to water permeability, which can reasonably lock the moisture in wood and reduce cracking deformation.