Sifeng antiseptic wood

One hundred years of inheritance, only thinking style


Scan Taobao stores

防腐木花箱
Your current location : Home >> News >> Technical information

How to make antiseptic wood flower rack?

2021-05-13 09:57:30
a

It is believed that most of the anti-corrosion wooden flower racks have to dig some holes in the vertical pole, and then fill the cement silo. Balcony flower rack to two people, for professional skills, one of them must have a certain ability of carpentry.

Prepare raw materials in advance:

1: Generally, there are four vertical poles and two vertical poles (two rails connected to the vertical pole, which are called vertical pole rail due to the reliability of their connection to the vertical pole), and the other is the main beam. This depends on the requirements of the contractor (because some are wider and some are high-density, naturally, if you prepare the specification and model of the lower rail in advance, you have to inform the contractor that it is the specification and model).

2: A bag of concrete, four small bags of gravel and stones.

3: Outdoor weathering layer wood oil.

4: Move the bridge support frame.

Prepare the required special tools in advance:

Fixed automatic cutting machine, mobile automatic cutting machine, curve saw, angle grinder, electric hand drill, iron drill, hammer (use hammer to avoid digging holes on concrete road), level pipe, level gauge, shovel, knife.

1: Carry out one grinding and polishing for all wood, or touch after wood processing (the purpose is to maintain the surface finish).

2: First, dig column holes within the specific scope of specifications and models. Generally, the hole can be excavated as deep as the hole. Naturally, this can be more standardized according to the specifications that meet the requirements, and the total width of the hole is determined by the length and total width of the ion exchange column. For example, if 20 * 20 wood is used as the support, the hole must be 40 * 40, and then a certain gap will be left, which means that the cement warehouse will leave the indoor space.

3: Saw a hole on the top of the vertical pole (the effect of this hole is to place the horizontal crotch of the vertical pole, so as to achieve a certain level of reliability). Two of them are opened in one direction. Because the two vertical poles are connected with bearing beams, one crotch is connected with two supports.

4: Draw the indoor space of each chair of the lower rail that you are going to prepare in advance for the vertical slide rail, and then produce and process the lower rail. First draw an opening for the lower rail, that is, the total width of the vertical slide rail, then draw it on the top, put the guide rail on the knife (like a cross, open the mouth, but let everyone look forward to maintaining it together), and then use the mobile automatic cutting machine to open the opening, Then flatten the lips with a knife.

5: Generally, in order to be beautiful and generous, the balcony flower rack will open a bend at the top of the upper slide rail. At this time, it is necessary to carry out the practical operation of curved drama performance. The fundamentals are very simple, and you'll see for yourself.

6: First, put the column slide on multiple columns, and then put the upper slide with overlapping openings on the upper side. First, put the two openings close to the columns. In this way, the development trend of English words can tend to be stable. Naturally, the four supports fixed with wood board can tend to be stable. After all, it's wood, and it's hard to stick to the body.

7: The last step is divided into two processes. Fill the cement silo first, and then moisten it by supporting it with herringbone ladder. In general, remove the stationary plate the next day.


The label

0