Sifeng antiseptic wood

One hundred years of inheritance, only thinking style


Scan Taobao stores

防腐木花箱
Your current location : Home >> News >> Industry news

Installation and steps of anti-corrosion wooden fence -- anti-corrosion wood manufacturer

2021-05-05 02:48:27
a

The wooden fence is the guardian of the building, which forms a circle of the building. The outdoor anti-corrosion wood guardrail has the function of separating and dividing the indoor space of the organization, as well as its enclosure structure, sign and secondary lining. Green plants can coil on it, and the way is variable. In terms of artistic beauty, it is tall and short, straight, virtual and real. Surrounded but not boring; Separation, continuous separation, to hide and expose, beauty depends on the angle.

The whole construction process of wooden fence project

1. Prepare in advance

2. Carry out basic level transfer inspection

3. Forging operation mark

4. Make crotch for anticorrosive wood guardrail

5. Guardrail installation

6. Polishing paint and civilized construction

In the production and processing of outdoor anti-corrosion wooden fence, we must first clarify the role and design style of anti-corrosion wooden fence. Generally, the height width ratio of people who protect green plants is about 0.2-0.2m. The number of cars allowed in and out is about 0.5-0.8m; These people in the courtyard are about 1.8-1m. The style of anti-corrosion wood guardrail continues to change, but its composition is basically the same: RF connector or concrete pile, guardrail column, side support point, guardrail control panel, etc.

In order to install the anti-corrosion wooden fence on the pure ecological soil layer, it is necessary to make clear the spacing between the guardrail posts, generally in the middle of 0.8-1m. The height width ratio and style of the guardrail determine the size of the column spacing: the height width ratio of the column is 0.6-0.8 times of the distance of each guardrail section. The guardrail column is buried in the deep layer of 30-1001080x. After the soil layer is compacted, the concrete can be poured at the origin of the concrete wooden column, and the concrete pile of the prefabricated component can be put into the hardware in advance, equipped with RF connector, and riveted with the wooden column.

Install anticorrosive wood guardrail on low wall. Low wall generally refers to concrete low wall or brick low wall, the height width ratio is between 20-1501080x, there is wall stack, there is no wall stack. If there is a wall stack, the process of the column is omitted, and the column is replaced by the column immediately. The side support points of the guardrail can be fixed on both sides of the wall stack according to the hardware configuration. The installation method of guardrail without wall stack is the same as that in pure ecological soil layer.

In the construction of outdoor anti-corrosion wood guardrail, we should pay attention to the guardrail board, including vertical board, level board, skew board, etc. The horizontal support of the guardrail can be riveted or fixed on the guardrail column according to the RF connector. When installing the guardrail, it is necessary to pay attention to the fact that the guardrail vertically bisects the road surface, and the guardrail is level. For the anti-corrosion wood guardrail installed in the pure ecological soil layer, two vertical poles should be installed at the corner to facilitate the expansion.

When the anticorrosive wood is dry outdoors and the environmental humidity of environmental factors is basically the same, the engineering construction should be carried out, and the current specifications should be used as far as possible. If laser cutting, drilling, etc. are required, CCA additives must be used to save, so as to ensure the service life of preservative wood. All connections shall be made of hot-dip galvanized RF connector or stainless steel plate RF connector and its hardware configuration for corrosion resistance. Do not use other metal parts, or it will rust quickly and seriously erode the anti-corrosion wood guardrail. After the construction and installation of outdoor anti-corrosion wood guardrail, dry it or blow dry it, apply wood protective paint to carry out paint on its surface. When building paint is used for outdoor wood, it must be mixed well. After that, the paint layer should be produced on the surface of wood under the standard of 24 hours sunny day.


The label

0